Several bulkheads were added at the center of the ship. Because little to no fairing will be required, no fairing lines were identified for these bulkheads.
And here’s another bulkhead in the aft part of the ship.
But maybe there is an opportunity here. If the bulkhead is positioned appropriately, then I can do this…
And that takes care of making the swivel gun stocks.
The same is done for the other locations with swivel gun stocks.
And just to get an idea of what the final product will look like, I thickened the bulkhead templates to the appropriate thickness.
This is what it looks like so far. I still need to work on the transom and bulkheads near the bow.
