And more planking… This is only my second time planking a hull, and it shows.
At the bow, things are getting a bit clinkered. I think it will be ok after gap filling and sanding, especially since I plan to paint the hull. The 1/8″ x 1/16″ strips I’m using are so thin already that not much spiling is possible.
Here’s the ugly part, the stern. Some of the planks broke while I was clamping them in place. The others I haven’t cut down because I’m uncertain about where to end them. Also, it’s a little hard to see here, but the wale strake should have been twisted much more back here. I think I may end up sanding down the wale strake completely then glue a 1/8″ x 1/16″ strip on top.