Using 1/16″ x 1/16″ strips, I have filled in part of the counter. It’s clear that I’ll need some filler to patch the gap between the hull planks and the counter planks.
Sultana build log – Part 27
Sultana build log – Part 26
Sultana build log – Part 25
And more planking… This is only my second time planking a hull, and it shows.
Sultana build log – Part 24
Sultana build log – Part 23
Assembly of the laser-cut pieces is complete (apart from the transom and rudder, which will be added later). Some observations:
The keel ended up being a little short. I added a little block at the end to fill in the missing material. I think the error is from underestimating the thickness of the rabbet strip. (You might also notice the garboard plank there. I forgot to take a picture before that was added.)
